Telephone : +44(0)28 9751 2650 Sales : sales@pkshutters.com     Accounts : accounts@pkshutters.com

Menu
Dock Levellers

PK Shutters Standard Hinge Lip Levellers

Offer a cost effective solution to your loading operation. Available in many types of specification ranging from length, width and load capability along with the installation choice of standard pit mounted, suspended or cast in models. Our dock levellers are built to the latest European Regulations and beyond, with extra safety features including safe operation LED indication on the control panel and illuminated solenoids for safer maintenance. We can also offer full Dock Leveller Service and Dock Leveller repairs on this model.

  • Safe-to-use green LED indicator on control panel
  • Hose break arrester system ensures that your leveller is safe to use
  • A system that prevents damage to the rear of the vehicle
  • Dock Solutions unique illuminated value control for safer maintenance
  • Self clean hinges
  • Hose break arrester
  • Easy one push button operation
  • Galvanised toe guards
  • Locked in safety support
  • Easy check oil level
  • We can also offer full Dock Leveller Service and Dock Leveller Repairs.

PK Shutters Electro-Hydraulic Telescopic Lip Levellers

The telescopic leveller offers you safe operational control being able to place the extending lip exactly were it is required enabling you to load your vehicle fully to the rear. Available in any type of configuration ranging from length, width Load capability etc along with the installation choice of standard pit mounted, suspended or cast in models. The dock leveller deck is designed to flex laterally by 100mm in each direction to compensate for vehicle tilt while remaining extremely rigid longitudinally.

Standard On All Our Manufactured Dock Levellers

  • Safe-to-use green LED indicator on control panel
  • Hose break arrester system ensures that your leveller is safe to use
  • A system that prevents damage to the rear of the vehicle
  • Dock Solutions unique illuminated value control for safer maintenance
  • All levellers are pre-wired with 8m of power and control cable for ease of installation.
  • Safe to use 100mm identification strip (see above)

Options available:

  • Colour Matching (where applicable)
  • Hot dip galvanised finish
  • Suspended / Cast-in-type / Standard Pit Mount
  • Insulated decks
  • Anti-draft system
  • Tapered lip
  • Up rated load capacity
  • Under deck E/stop system
  • Low noise operation (deck treatment) Smooth anti-slip for small cage wheels
  • Lip length 500mm, 750mm or 1,000mm
  • Integrated & specialist controls

PK Shutters Dock Seals

This basic yet efficient sealing system supplies you with a cost effective alternative to other types of sealing systems. All models being constructed from high tear resistant material and high recovery rate foam in-fills. The DS1000/1001 models are particularly suited where the vehicle range and width are of a similar height

General Specification for DS1000/1 & DSM1000/1 Models

A high recovery rated foam, covered with a 900g per m2 base fabric with high wear resistant 1500g m2 fabric on the impact areas, which are stitched together with heavy duty bonded nylon thread and then mounted on a solid 50mm treated timber base board.

DS1001 heavy duty seal with wear pleats.

This model is particularly suited where the vehicle range and width area of a similar height.
With the mobile headed seal it gives you the option to cater for more varied height vehicles.

DSM1001 Mobile Headed Dock Seal

This basic yet efficient sealing system supplies you with a cost effective alternative to other types of sealing systems. All models being constructed from high tear resistant material and high recovery rate foam in-fills. The adjustable head dock seal is an effective way of sealing the rear of vehicles.

The head curtain is run along a spring counterbalanced roller for smooth height adjustment, giving you the option to cater for more varied height vehicles allowing them to reverse comfortably into the loading bay area.

The high visibility stripe ensures that the vehicle reverses to the correct point. The mobile head seal has a range of 1 metre or the alternative would be to have deeper head seals.

PK Shutters Retractable Dock Shelters

The DS3000 retractable dock shelter is the most commonly used system in use today. Offering a relativly high sealing solution to a wide range of vehicles.

Manufactured with a 60mm x 30mm galvanised steel box section. Cantilevered arms bolted to the back and front side beams.

These are pivoted at each end to allow the shelter to retract against the building in the case of vehicle contact.

  • The dock shelters are available in various heights, widths and projections to facilitate your individual requirements.
  • Also available are curtain dimensions and designs to achieve the maximum sealing solution for your vehicle fleet.
  • The dock shelter design allows for easy installation to almost any type of building.
  • All that will be required will be a suitable flat fixing area.
  • This area should be flush with building line and have a flat surface.

Options Available:

  • Curtain Size
  • Draught Curtains
  • Retractable head curtain system
  • Corner cushions
  • Logo or number identification
  • Ground Mounted

General Specifications

  • The frames of the roof and sides are clad with a 600gm/m² flexible PVC polyester.
  • The head curtain and two side curtains manufactured from 3.5mm thick polyester.
  • Both come with internal memory structure to enable the curtain to return to original position after it being distorted.
  • The woven polyester has high wind and tear resistance built in.

dock-level-before-fitting insulated-roller-shutters-and-dock-levels-1
dock-level-fitted insulated-roller-shutters-and-dock-levels-2
insulated-roller-shutters-and-dock-levels-3